Spread the lights out and mount each light up to 5 feet deep and 15-20 feet apart from one another on pilings down the dock. You can create many different light spreads by adjusting the height, depth and direction of each head. Another option is to put a 45 degree elbow on the 90 degree supplied, then insert pvc pipe. This will point the head up at a 45 degree angle coming out from the pipe. This will spread more of the light up towards the surface. The bottom absords lights so try not to point the light toward the bottom. If facing directly out from dock, then half the light will travel to the bottom to absorb and disappear. A popular choice is to put the light about 1 foot off the bottom and point each lighthead around 30-45 degrees up towards surface. Play with the angles for your dock and water conditions. If you coat all pvc areas with a very light coating of waterproof marine grease, it will greatly help prevent the adhesion of barnicles and marine growth. Pvc is porous and you have to do it before the light goes into the water. PVC surface is like a sponge. If salt and water get in first, the grease can not get into the already clogged and filled pores. You will get very little if any growth over the leds themselves as organisms have a tough time growing in a single wavelength world. You can also apply a thin film of vasoline once a month to keep the light looking new. It is not the heat that prevents the growth. Unlike the hundreds of watts, ac powered mercury vapor and halogen bulbs where the intense heat cooks the growth off. The light runs about 10 degrees above the water temperature and is one of our coolest running lights leading to long lifetimes of the leds. The light is powered by safe low dc voltage. No live ac going into your water!! Lighthead must always be underwater for cooling purposes or you will eventually burn up the leds out of the water. This will void your warranty. Be aware of low tides and always have the lighthead at least 1-2 feet below the lowest water mark. Please call with any questions. Thanks Andy 508 524 0296 Includes: 3- 25 led 75watt bottom facing up light heads in standard 3" pvc. with single transformer. 40'(ea.) - 18awg SJEOOW cable per light. 1 - Waterproof IP67 rated Meanwell 100watt epoxy embedded transformer with 5' power cord. All three lights are hooked up in series to the single transformer, which is plugged into a standard photo timer or outlet. **Call for custom wire lengths up to 100+ feet at little additional cost of .50c/ft.**Select options
Includes: (2)- 3.5" dia x 1.88" high, flanged pvc flush mount fitting light assembly (4)- 6-32 stainless steel screws-2 each light 22' - 22 aww M27500 military grade teflon cable on each lightSelect options
Color: Bright White Includes:Select options
- Batteries: (2) New Samsung commercial grade 2.6amps/hr, 18650 lithium ion batteries with dual wall charger. These are the safe non-exploding batteries, unlike the lithium polymer which can explode and burn and the ones you hear about. These are very safe even if dropped into the water.
- Full accessory kit for multiple uses.
- Extra brand new Samsung 2600mah batteries sold separately.
- 1000'+ Foot Deep Waterproof light head with Cree XML L2 1200lumen/10watt Bright White Led.
- Gigging 1" Snap connector head for 1/2" pvc pipe. You supply the thin wall pipe.
- Extra Snap head with marine grade bungee cord for attaching to paddleboard/kayak/canoe or anything else you can think of.
- Large and small float for casting as bobber on surface facing down or for sinking and facing up off bottom.
- Custom stainless steel rubber expansion plug-good for extreme depths- <1500' deep. We make colored versions for swordfishing.
You will receive;Select options
- Fully waterproof Triple Cree XML L2 epoxy embedded head with aluminum refectors, 15' of military grade teflon ultra thin but extremely tough cable and heavy duty compact connectors with alligator clips.
- Needed to purchase separately-12vdc battery and approximately 42-48" 3/4" thin wall pvc pipe. No real need to glue the head on-it stays put when pipe is twisted into head.
Includes: 1 - (48) 3watt leds in 2" diameter x 8" long solid epoxy embedded aluminum bar. 25,50,75,100,125 and 150' cable - 18 awg heavy duty seoprene black rubber cable depending on length 1 - All New IP67 waterproof epoxy embedded 60 watt transformer with 5' power cordSelect options
- 1 - 48 led (144watts) epoxy embedded clear acrylic tube
- 32-36'- 18 awg heavy duty SJOOW cable with embedded strain relief
- heavy duty vinyl end cap for protection 1 - stainless wire eyelet for attaching float or chum bag on end 2 - heavy duty alligator clips for battery attach
Includes: 1 - (20) 3watt leds in 1" diameter x 8" long solid epoxy embedded aluminum bar. 25,50,75,100 and 125' cable - 18 awg heavy duty seoprene black rubber cable. 2- All New IP67 waterproof epoxy embedded 60 watt transformer with 5' power cord.Select options
Includes: Light Head- (40) 3watt high power leds mounted in 4" pvc housing. Cable is embedded into light head with epoxy,forever waterproof! Direct water cooling of aluminum block with through hole. Sealed high psi internal decay proof internal airbag for floatation. 18 awg heavy duty seoprene black rubber cable 1 - IP67 waterproof epoxy embedded transformer with 4-6' power cordSelect options
Includes: 1 - (40) 3watt leds epoxy mounted head in 4" pvc flange 20,30,40,50,60,80' and up to 150'cable - 18 awg heavy duty SJEOOW cable made in USA. 1 - All new IP67 "almost" waterproof epoxy embedded 60 watt transformer with 5' power cordSelect options
***Pictures above are a single 24led transom light facing out from dock. Pictures of 40led coming soon.. Includes: 1 - 4.5" dia x 2" high flanged pvc flush mount fitting light assembly 2 - #6x1" stainless steel screws 22' - 22 awg heavy duty military grade teflon cable.Select options
Includes: All new 120 watt custom high power led head with built in thermal protection switch to protect light if run out of water accidentally. (2)- 4.5" dia x 2" high, flanged pvc flush mount fitting light assembly (4)- #6x1" stainless steel screws-2 each light 22' - 22 awg heavy duty double wall military grade M27500 Teflon cable each lightSelect options
High power, custom made underwater pool light unlike any other made, for above or below ground pools. Each led is 3w and 65 lumens in blue, 140/150 lumens in aqua/green and 220 lumens in white. There are 16 leds for a total of 48watts. All colors are eye-safe but do not stare at light for...Select options