1 - (24) 3watt leds in 1.5" diameter x 8" long solid epoxy embedded aluminum bar.
25,50,75,100 and 125' cable - 18 awg heavy duty usa made black rubber cable.
2- All New IP67 waterproof epoxy embedded 60 watt transformer with 5' power cord.
1 - (48) 3watt leds in 2" diameter x 8" long solid epoxy embedded aluminum bar.
25,50,75,100,125 and 150' cable - 18 awg heavy duty seoprene black rubber cable depending on length
1 - All New IP67 waterproof epoxy embedded 60 watt transformer with 5' power cord
***Pictures above are a single 24led transom light facing out from dock. Pictures of 40led coming soon..
1 - 4.5" dia x 2" high flanged pvc flush mount fitting light assembly
2 - #6x1" stainless steel screws
22' - 22 awg heavy duty military grade teflon cable.
All new 120 watt custom high power led head with built in thermal protection switch to protect light if run out of water accidentally.
(2)- 4.5" dia x 2" high, flanged pvc flush mount fitting light assembly
(4)- #6x1" stainless steel screws-2 each light
22' - 22 awg heavy duty double wall military grade M27500 Teflon cable each light
High power, custom made underwater pool light unlike any other made, for above or below ground pools. Each led is 3w and 65 lumens in blue, 140/150 lumens in aqua/green and 220 lumens in white. There are 16 leds for a total of 48watts. All colors are eye-safe but do not stare at light for...
Spread the lights out and place 25-40 feet apart from one another off the dock. The bottom absords lights so try not to point the light toward the bottom. If facing directly out from dock, then half the light will travel to the bottom, get absorbed and disappear. If you coat all pvc areas with a very light coating of waterproof marine grease, it will greatly help prevent the adhesion of barnicles and marine growth. Pvc is porous and you have to do it before the light goes into the water. PVC surface is like a sponge. If salt and water get in first, the grease can not get into the already clogged and filled pores. You will get very little if any growth over the leds themselves as organisms have a tough time growing in a single wavelength world. You can also apply a thin film of vasoline once a month to keep the light looking new. It is not the heat with leds that prevents the growth. Unlike the hundreds of watts, ac powered mercury vapor and halogen bulbs where the intense heat cooks the growth off. The light runs about 10 degrees above the water temperature and is one of our coolest running lights leading to long lifetimes of the leds. The light is powered by safe low dc voltage. No live ac going into your water!! Lighthead must always be underwater for cooling purposes or you will eventually burn up the leds out of the water. This will void your warranty. Be aware of low tides and always have the lighthead at least 1-2 feet below the lowest water mark. Please call with any questions. Thanks Andy 508 524 0296
2- 40 led 120watt bottom facing up light heads in standard 4" pvc. with single transformer.
40'(ea.) - 18awg SJEOOW cable per light.
1 - Waterproof IP67 rated Meanwell 100watt epoxy embedded transformer with 5' power cord.
Both lights are hooked up in series to the single transformer, which is plugged into a standard photo timer or outlet.
**Call for custom wire lengths up to 100+ feet at little additional cost of .50c/ft.**