120 Watt Depth Adjustable High-Intensity Floating Dock Light for Deep/Murky Water
$269.95 – $329.95
- Depth-Adjustable: Can be custom adjusted to specific depths to be right above mud or sediment on the bottom. To use, tie wrap a weight to the cord and that will act as the anchor point to how high the light will float.
- High-Intensity: Incredibly bright and affordable, we offer the industry-leading lumen per dollar ratio. The light shoots a 140° beam angle from the 40 LED/ 120 Watt light head. The deeper the light the larger the diameter of light spread on the surface. Our lumen output per color is shown below.
- Fish Attractant: Lure aquatic life right up next to your dock. Phytoplankton feed on the light which in turn brings all other members of the food chain.
- Versatile: Can be used for floating docks, fixed docks, saltwater docks, and freshwater docks. Intended for water deeper than 10′ and/or murky water at the bottom. All you need is a 110 Ac standard outlet and a water source.
- Plug N’ Play: Simply plug into a 110 AC outlet and heave this off the dock!
- Safe: We use safe low voltage AC to DC transformers to ensure there is no risk of electrocution while swimming.
Depth Adjustable High-Intensity Floating Dock Light for Deep Water
Featuring our 40 LED/120 Watt Depth Adjustable Floating Dock Light. Designed exclusively for underwater dock use, the light can be depth adjusted from the bottom. Similar to our high-intensity underwater LED dock light for deep water, this light shines a 140° beam angle from the bottom until it reaches the surface. Our floating dock light is for deepwater docks, docks with poor water quality, and docks with mud on the bottom. This light is not mountable.
Instructions
Simply throw, plug, and go. After tie wrapping a weight on the cord of the light, you just heave it off the dock, it will sink and float facing up. The cord lays on the bottom and plugs into any 110ac standard outlet with a timer or photocell. The weight can be adjusted to determine how much the light floats off the bottom. Depending on your water conditions, adjusting the light can allow you to evade mud and sediment on the bottom, and decide on the diameter of light reaching the surface. The diameter of the light is dependent on how deep the light is placed.
Versatile
Useful in any marine environment, the underwater dock light can be used for floating docks, fixed docks, saltwater docks, or freshwater docks. Additionally, this can be used for muddy docks, docks with poor water clarity, and deepwater docks. All you need is a 110 AC power outlet and a water source. These are safe, low voltage current high-intensity underwater dock lights perfect for nighttime swimming.
High Intensity
Incredibly bright and affordable, we offer unparalleled lumen per dollar ratios in the underwater lighting industry. Here at Loomis LED, we strive to create high-intensity underwater dock lights at a fraction of the cost to competition. Competitors throughout the underwater lighting industry lie about lumen outputs in an effort to sell their products. Not only are we truthful about lumen output, but we show you how lumen output per color varies across lights.
Lumen output
- White: 180 * 40 = 7200 lumens
- Green: 130 * 40 = 5200 lumens
- Aqua: 110 * 40 =4400 lumens
- Blue: 50 * 40 = 2000 lumens
Fish Attractant
Fish and aquatic life alike will be drawn to the LED floating dock light. Phytoplankton is attracted to light to feed during the night. Other marine life and fish will come to feed on the phytoplankton essentially creating a fish feeder under your dock. Perfect for dock fishing, night fishing, and nighttime viewing of aquatic life. For example, it could serve as a snook light for nighttime dock fishing. To learn more, read our article, “Why do Underwater Lights Attract Fish?” here.
Includes
- (1) – lighthead with (40) 3 Watt high power LEDs mounted in 4″ x 10″ PVC housing
- (1) – Sealed high pressure, decay proof internal airbag for floatation
- 2- year warranty
- (1) – 40′, 60′, 80′, 100′, 120′, or 150′ of 18 AWG heavy-duty Seoprene black rubber cable
- (1) – IP67 waterproof epoxy embedded Meanwell transformer with 5′ power cord
Quality Materials
Made in the USA, we primarily use components made in the USA except for the LEDs. To make this light, we mount a Cree 3535 ceramic board with (40) top quality 3 Watt EpiLEDs. Next, the board is thermally adhered to a 6061 machined aluminum bar for direct heat sync. Solid gold bond wires are then directly soldered using machine automated processes for extreme cooling. Then, 18 AWG heavy-duty Seoprene black rubber cable is attached to the back of the light head The light head and cable are epoxy embedded to ensure total long waterproofness. Lastly, a GE high-temperature silicone dome is glued above the LEDs to serve as an indestructible lens. We include an epoxy embedded Meanwell waterproof IP67 rated auto voltage/current transformer to convert the AC to DC.
Warranty Information
Included with the floating dock light, is our 2-year warranty. The warranty is voided by electrical damage, cable damage, or overheating due to running the light out of water. We do not warranty the Meanwell transformers included with the light.
Submit your review | |
1 2 3 4 5 | |
Submit Cancel |
Specifications
24 led dock mount head
- Size: 3” pvc flanged fitting
- Wire: 40 feet 16awg heavy duty black rubber seoprene cable
- Color: Green, Blue or White
- Lumens: 3600 green, 1800 blue, 4800 white
- Watts: 72
- Current: 4.2 Amps
Warranty: 2 years excludes return shipping and heat damage from running out of water.
Installation Instructions: Attached a 1-2lb weight and tie wrap to cord the distance to float off the bottom. A plastic bag with rocks works well. Throw light off dock and it will sink to the bottom and float facing up-all 24leds!!! With the light 10 feet under you should get a minimum 30-50 foot circle of intense light depending on water clarity. Recommended for muddy bottoms where my standard bottom up light would sink into the mud. A nice feature of this light is the ability to change it’s depth and light intensity. You can run the light off a 12vdc marine battery also but it comes standard with a power supply and 40 feet of heavy duty cable. A really nice light that is just as powerful as a 250watt mercury vapor bulb. Led lights attract more fish due to the single wavelength of the leds. Green is true green and the same with the other colors..
Simple installation, no wiring needed just place light in water and plug in to standard AC outlet.
Timers or photocells can be added on input side of transformer (ac side).
Submit your review | |
1 2 3 4 5 | |
Submit Cancel |
Reviews (0)
Your email address will not be published. Required fields are marked *
Be the first to review “120 Watt Depth Adjustable High-Intensity Floating Dock Light for Deep/Murky Water” Cancel reply
You must be logged in to post a comment.
Related products
- High-Intensity: Incredibly bright and affordable, our LED underwater dock lights offer unparalleled lumen per dollar ratios in the underwater lighting industry. Available in 24 LEDs at 72 Watts or 48 LEDs at 144 Watts. Read more about lumen output per color below.
- Plug N' Play: Just plug into a standard 110 AC outlet and tie an 8" by 8" patio paver to the bottom of the light and heave. The light will sink to the bottom and illuminate a huge diameter of light in a 360° beam.
- Shallow Water: Illuminates in a 360° beam angle to illuminate a wider circle in shallow waters less than 10 feet deep. Fully submersible, and designed to be run exclusively underwater.
- Energy-Efficient: These will cost roughly 10 to 25 cents a day to run these lights. Replace those expensive metal-halide/mercury vapor bulbs with drastically higher electrical costs, with energy-efficient LED underwater dock lights.
- Long-Lasting: Durable and built to last, our light will last a lifetime of use. Conservatively, LEDs will last for around 30,000 hours of use. The only way these lights will fail is by failing to adhere to our instructions.
- Versatile: Used for freshwater docks, saltwater docks, floating docks, fixed docks, and even your swimming pool. As long as there is both a water source and a standard 110 AC outlet this dock light will work anywhere.
- Safety: These operate on safe low voltage direct current due to our high-quality AC to DC transformers. There is no need to worry about electrical runoff.
- Easy Install: All you have to do is drill 2 small 1/8" holes in the back of the boat and surface mount the lighthead to the back of the transom. Then run the wires through the holes and connect the positive wire to the positive battery terminal and the negative wire to the negative battery terminal on a 12V battery.
- High-Intensity: Incredibly bright and affordable, we by far offer the highest lumen per dollar ratio in the underwater lighting industry for transom lights. Look at the table in the product pictures for more information. Read more below how lumen output is dependent on LED color.
- Long-Lasting: Built with high-quality materials, these will last for years of underwater submersion. Built with (40) 3 Watt LEDs totaling 120 Watts, our LEDs last for over 40,000 hours. With proper minimal maintenance, this light will last a lifetime.
- Fish Attractant: Lure all sorts of aquatic life right up next to your fishing boat. Green attracts the most fish.
- Dual Color Options: Available in dual-color variants, you can choose two colors giving you two colors of LEDs one on each side of the lighthead. You can either blend them or run them separately.
- High Intensity: 48 incredibly bright – 3 Watt LEDs for a total of 144 Watts in white, green, aqua, or blue. The lumen output of this light varies depending on the LED color. Read our color section below to learn more.
- Plug N’ Play: Plug into a standard 110 VAC outlet and throw this off the boat, dock, pool, etc. and watch this illuminate a 360° circle around the light.
- Fish Attractant: Aquatic life is drawn to underwater lights. Phytoplankton feed on light, ultimately, drawing higher members of the aquatic food chain to the light.
- Submersible: With a transformer, we can do longer cable lengths up to 125'. For fishing boats with 110 VAC outlets, these lights can be hooked up to go deeper than our battery-powered fishing drop lights.
- Multiple Applications: Can be dropped off the dock, boat, pool, or anything underwater. All it requires is a 110AC outlet.
- Quality Materials: (4) 36 Watt LED boards, crystal clear temperature-grade epoxy, heavy-duty vinyl end cap for protection, stainless wire eyelet for attaching float or chum bag, and up to 125' of 18 AWG heavy duty SJOOW cable with embedded strain relief.
- Long-Lasting: We run our LEDs at lower power leading to a longer lifetime. We do this because LEDs get most of their lumens at 60 - 70% input power, leading to lower electrical costs, reduced operating temperatures, and longer lifetimes. The indestructible lighthead is fully epoxy embedded, with heavy-duty marine-grade cable.
- Portable: Runs off (2) lightweight Samsung commercial-grade 3 amps/hr, 18650 lithium-ion batteries. Other gigging lights on the market require you to carry around a 12V battery, making this incredibly lightweight and easy-to-use. The lighthead only weighs 12 ounces and the PVC shaft weighs 6 ounces. Together it weighs slightly over a pound.
- High-Intensity: Puts out 1200 lumens in bright white from a Cree XML L2 LED chip. Even in less than ideal murky water, this light will illuminate a huge area equivalent to 1 of your car headlights on high.
- Capacity: About 2 hours of run-time for non-stop flounder gigging. Additional batteries can be purchased if 2 hours isn't long enough for your use.
- Multipurpose: Can be used for casting, trolling, or anywhere a high-powered waterproof high-intensity light source is needed.
- Fish Attractant: Use this light for nighttime gigging of flounder, frog, shrimp, etc. Fish are attracted to light during the night.
- Color: We use bright white because it is proven to be the best for flounder gigging.
- Submersible: 40% of light is reflected off the water when using an out of water pool light, Epoxy embedded and designed to last a lifetime in the pool.
- High-Intensity: 12 - 3 Watt LEDs for a total of 36 Watts. This light is so much brighter than other lighting options on the market. Each color puts out differing lumen amounts:
- Blue: 50 * 12 = 600 lumens
- Aqua: 110 * 12 = 1320 lumens
- Green: 130 * 12 = 1560 lumens
- White: 180 * 12 = 2160 lumens
- Easy-to-Install: Just hang the wire loop around the coping of the pool and this light is plug and play.
- Energy-Efficient: Replace the costly halogens and lower electrical costs with LEDs.
- Color Options: Available in Aqua, Blue, Green, White, Red, and Amber.
- Wide Beam Angle: 140° beam angle with water refraction disperses light spread around the pool for even light dispersion.
- High-Intensity: Designed with dual 12 LED/36 Watt lightheads for a total of 72 Watts. Dual lightheads are completely adjustable allowing you to create the perfect beam angle depending on your water conditions. Read more below about how lumen output varies across LED colors.
- Mounted: Designed to be mounted to a fixed dock structure or piling in saltwater or freshwater conditions.
- Fish Attractant: Lure all sorts of aquatic life right up to your dock with these pole mount lights.
- Long-Lasting: Designed to be both durable and long-lasting, we run our LEDs at lower power consumption so they last longer. Typically LEDs last for around 30,000 hours of run time.
- Energy Efficient: Replace those old metal-halide/mercury vapor bulbs that consume a lot of electricity with LEDs. For 8 hours of run time per night, the light will cost under 10 cents a day.
- Easy Install: Simply drill 2 small 1/8″ holes in the back of the boat and surface mount the lighthead to the back of the boat transom.
- High-Intensity: Incredibly bright and affordable, we offer the highest lumens per dollar ratio in the underwater transom lighting industry. We offer 6 times more lumens for the cost than our closest competitor. Look at the table in the product pictures for more information. Lumen output is dependent on color. Read more below to decide your color.
- Long-Lasting: Built with high-quality materials, these will last for years of underwater submersion. Built with (24) 3 Watt LEDs totaling 72 Watts, our LEDs last for over 40,000 hours. With proper minimal maintenance, this light will last a lifetime.
- Fish Attractant: All sorts of aquatic life will be drawn to this light. Phytoplankton are attracted to underwater lights at night as a food source. In turn, other members of the food chain will come to feed on the phytoplankton.
- Dual Color Options: Available in dual-color variants, we offer two colors of LEDs one on each side of the lighthead. You can either blend them for a 3rd color or run them separately depending on what you want.
- High-Intensity: Built with (24) or (40) 3 Watt high power LEDs totaling 72 and 120 Watts, this light is incredibly bright. Our LED underwater dock lights offer unparalleled lumen per dollar ratios in the underwater lighting industry. Read more about how lumen output per color varies below.
- Plug N’ Play: Simply tie a 6″ by 6″ patio paver to the bottom of the light, plug into a standard 110 AC outlet, and heave. The light will sink to the bottom and illuminate a huge diameter of light in a 140° beam.
- Submersible: Completely submersible, this underwater light is intended for water deeper than 10' or shining out from your dock when mounted.
- Energy-Efficient: Replace those expensive metal halide/mercury vapor bulbs with cheaper energy-efficient LED underwater dock lights. Costs roughly 10 to 25 cents a day to run these lights at 4 hours a night.
- Long-Lasting: Durable and built to last, LEDs last for over 30,000 hours of run time. Built with high-quality materials, these lights are simply indestructible. Failing to adhere to our instructions is the only way for these lights to fail. We offer a 2-year warranty because we stand behind our USA manufactured products.
- Versatile: Used for saltwater docks, freshwater docks, fixed docks, floating docks, and even your swimming pool. As long as there are a water source and a standard 110 AC outlet this light will work anywhere. Mountable to dock pilings.
- Safety: Operating on safe low voltage DC current, there is no need to worry about electrical runoff. We use high-quality AC to DC Meanwell transformers so you can swim carefree.
There are no reviews yet.