Shop

Spread the lights out and mount each light up to 5 feet deep and 15-20 feet apart from one another on pilings down the dock. You can create many different light spreads by adjusting the height, depth and direction of each head. Another option is to put a 45 degree elbow on the 90 degree supplied, then insert pvc pipe. This will point the head up at a 45 degree angle coming out from the pipe. This will spread more of the light up towards the surface. The bottom absords lights so try not to point the light toward the bottom. If facing directly out from dock, then half the light will travel to the bottom to absorb and disappear. A popular choice is to put the light about 1 foot off the bottom and point each lighthead around 30-45 degrees up towards surface. Play with the angles for your dock and water conditions. If you coat all pvc areas with a very light coating of waterproof marine grease, it will greatly help prevent the adhesion of barnicles and marine growth. Pvc is porous and you have to do it before the light goes into the water. PVC surface is like a sponge. If salt and water get in first, the grease can not get into the already clogged and filled pores. You will get very little if any growth over the leds themselves as organisms have a tough time growing in a single wavelength world. You can also apply a thin film of vasoline once a month to keep the light looking new. It is not the heat that prevents the growth. Unlike the hundreds of watts, ac powered mercury vapor and halogen bulbs where the intense heat cooks the growth off. The light runs about 10 degrees above the water temperature and is one of our coolest running lights leading to long lifetimes of the leds. The light is powered by safe low dc voltage. No live ac going into your water!! Lighthead must always be underwater for cooling purposes or you will eventually burn up the leds out of the water. This will void your warranty. Be aware of low tides and always have the lighthead at least 1-2 feet below the lowest water mark. Please call with any questions. Thanks Andy 508 524 0296   Includes: 3- 12 led 36watt light heads mounted in standard 2" pvc 90 deg. elbows 15'(ea.) -  22 awg military grade Teflon pair silver or tin coated copper wire per light. 1 - outdoor rated very waterproof IP67 rated transformer 120vac/36vdc@1.75amps with 5' power cord Customer supplies: 2" gray pvc pipe 2" abs plastic pipe clamps (all available in electrical aisle of Lowes or Home Depot) **Call for custom wire lengths**

New high quality LG 18650 lithium ion battery with 3400mah or 3.4 amps/hour. This battery is good for 1500 charge cycles and will provide the most light output of the gigging stick. 60-90min runtime on high. Cheapest price around. Price is for 4 new batteries. This battery is only for the gigging sticks, portables and flashlight. Will charge just fine with wall charger that came with product.

These are the most durable and powerful underwater led lights made 100% in America. We machine all our own aluminum blocks, design our own top quality, high power led boards using only the best components and epoxy embed everything for years of total waterproofing. We use only the best and toughest teflon wire, which will last forever without permeation of the jacket. Pvc and other thermoplastic wires will allow moisture and oxygen to get inside the wire, thus oxidizing and turning the wire black. Expect 10-25+ feet of outward illumination depending on water clarity. Green is the best all around color. Beam angle is 140 degree cone coming off lighthead. Tough and ultra thin special plastic lens are laser cut by us and bonded for a very tough and indestructible housing.  Lights can be mounted up to 5 feet deep and 15-20 feet apart from one another on pilings down the dock. You can create many different light spreads by adjusting the height, depth and direction of each head. Another option is to put a 45 degree elbow on the 90 degree supplied, then insert pvc pipe. This will point the head up at a 45 degree angle coming out from the pipe. This will spread more of the light up towards the surface. The bottom absords lights so try not to point the light toward the bottom. If facing directly out from dock, then half the light will travel to the bottom to absorb and disappear. A popular choice is to put the light about 1 foot off the bottom and point each lighthead around 30-45 degrees up towards surface. Play with the angles for your dock and water conditions. If you coat all pvc areas with a very light coating of waterproof marine grease, it will greatly help prevent the adhesion of barnicles and marine growth. Pvc is porous and you have to do it before the light goes into the water. PVC surface is like a sponge. If salt and water get in first, the grease can not get into the already clogged and filled pores. You will get very little if any growth over the leds themselves as organisms have a tough time growing in a single wavelength world. You can also apply a thin film of vasoline once a month to keep the light looking new. It is not the heat that prevents the growth. Unlike the hundreds of watts, ac powered mercury vapor and halogen bulbs where the intense heat cooks the growth off. The light runs about 10 degrees above the water temperature and is one of our coolest running lights leading to long lifetimes of the leds. The light is powered by safe low dc voltage. No live ac going into your water!! Lighthead must always be underwater for cooling purposes or you will eventually burn up the leds out of the water. This will void your warranty. Be aware of low tides and always have the lighthead at least 1-2 feet below the lowest water mark. Please call with any questions. Thanks Andy 508 524 0296   Includes: (4) - 12 led lightheads mounted in standard 2" pvc 90 deg. elbows 15' (ea.) -  22 awg military grade Teflon pair silver or tin coated copper wire 1 - 100 watt transformer with 5' power cord Customer supplies: 2" gray pvc pipe 2" abs plastic pipe clamps (all available in electrical aisle of Lowes or Home Depot)

Includes:

• 1 - 48 led (144watts) epoxy embedded clear acrylic tube
• 32-36'-  18 awg heavy duty SJOOW cable with embedded strain relief
• heavy duty vinyl end cap for protection 1 - stainless wire eyelet for attaching float or chum bag on end 2 -  heavy duty alligator clips for battery attach